Onya Baby Infant Insert Tutorial

This instructional video will show you how to use the baby booster infant insert with your Onya Baby carrier.

Video Transcript

(0:05) This video will show you how to use your Onya Baby Booster with your Onya Baby Carrier so you can use your carrier with your newborn.
(0:14) Only use your booster and carrier in the front carry position and when carrying your infant.
(0:20) Practice over a soft surface or with another adult while you're learning.
(0:25) While standing, place your Onya Baby Carrier around your waist with the body of your carrier in the front.
(0:32) The buckle should pass through the safety elastic.
(0:35) Listen for the... *CLICK*
(0:38) Shoulder straps are buckled and loose.
(0:41) Sit down on a stable, soft surface.
(0:44) Place your booster inside the body of your Onya Carrier with the head support at the top.
(0:50) Place your baby on the booster.
(0:53) Make sure your baby's head is supported by the head support of the booster at all times.
(0:59) Bring the lower portion of the booster under your baby's bum, much like you're putting on a diaper.
(1:06) Thread the snap strap through the side positioner on the booster.
(1:11) Then thread the snap strap through the side positioner on the body of your Onya Carrier.
(1:18) Now, repeat these steps with the snap strap on the other side.
(1:24) Your baby will be in a froggy or M position - a spread squat position with the legs in a natural knee bend and open, flexed hips.
(1:35) Support your baby as you raise your Onya Baby Carrier to place the shoulder straps on yourself.
(1:43) Tighten until the shoulder straps are snug.
(1:51) Buckle the chest clip behind your back to secure the shoulder straps on your shoulders.
(1:57) Pull the strap to make it snug.
(2:00) Your baby should be positioned where you'd naturally carry her.
(2:04) Her head should be close enough to kiss.